New 300 Blackout Trimming Jig for 2'' Chop Saw – Auto Eject Scratch-less Design

Description

Tired of making a mess with those other trimmers?
Struggle with constant jams
and inconsistent trim lengths?
Metal Jigs Gouging or scratching
your brass and causing failure to eject?
Try My Original Easy Trimming Jig!
its great for all  .223 and 5.56 casings!
Don’t be fooled by the imitations found elsewhere.
These jigs are designed by certified professionals in 3D design with over 20 years experience.
Trim casings for 300 Blackout,
300 Whisper and 277 Wolverine
Quickly and Easily Install!
NO Additional Modifications to Your Saw!
Blade Will Never Contact Jig – No More Dull Blades!
Stock Trim Length – 1.368’’
Fits Harbor Freight and similar 2’’ mini chop saws
You will need to prepare your saw
Prior to use to get the best results.
1: Tram your saw – You will need to ensure the vise is aligned square to the blade. Tighten down the knob.
2: Open the vise and insert the jig until it rests square on the notch. Tighten the vise snug.
3. Insert one casing from the right side of the jig, and rest in the indent. Hold the casing to the right and drop the Blade.
4. The neck will drop free and fall towards the rear leaving a perfectly cut case ready to deburr.
To complete your casings you will need to deburr
and / or rotary trim the casings down to the proper size for the cartridge you intend on loading.
This jig leaves you options by maintaining maximum
case length for a clean final trim.
De-prime brass prior to using this jig, and clean all cases well prior to loading.